UVP 81-0267-01 Doc-ItLS and VisionWorksLS Software - Manual (Page 4)

UVP L IFE S CIENCE S OFTWARE
R EGISTER THE S OFTWARE
LS Software must be activated by entering an activation code provided by UVP in order to gain
full access rights to the software.
Once the LS Software is installed, it will operate in full-feature trial mode for 14 days. Within the
14-day trial mode, the LS Software must be registered with UVP. Otherwise, the software will only
operate in a limited demonstration mode after the 14-day trial period. The demonstration mode
limits the software to opening and using only the demonstration images provided by UVP. Refer
to the steps below to register the software.
1. To immediately activate the
software online, choose On
the fly activation. If the
computer is not connected to
the Internet, follow the
instructions for Offline
activation or call UVP to
register the software.
2. Click Next to continue.
3. Complete all required
information on the form.
4. Fill out the Serial Number
located on the flash drive
box. The number should be
four sets of six numbers (24
digits total).
5. Click on Get Activation No.
and then click on Activate
when the Activation
Number appears in the box.
- 4 -
81-0266-01 Rev G
81-0267-01 Rev G