Ubiquiti Networks airFibe24 - Manual (Page 20)

4. Connect the other end of the Ethernet cable from the DATA
port to the Ethernet port labeled POE on the GigE PoE Adapter.
5. Connect an Ethernet cable from your network to the Ethernet
port labeled LAN on the GigE PoE Adapter.
6. Connect the Power Cord to the power port on the GigE PoE
Adapter. Connect the other end of the Power Cord to a power
source.
Note: For added protection, we recommend installing
two GigE PoE surge protectors. Install the first surge
protector within one meter of the airFiber DATA port, and
install the second surge protector at the ingress point of
the location housing the wired network equipment.
18
airFiber® AF-24 Quick Start Guide