Two Notes Wall of Sound III - Manual (Page 16)

Using TORPEDO WoS III
6 Presets
• Preset list: Click on the list to select the preset you want to load.
• SAVE: Click on the "SAVE" button to save the current preset.
• COMPARE: The "COMPARE" button controls an evolved comparison func-
tion developed by Two Notes Audio Engineering. Think about it as a tem-
porary set of parameters, re-initialized after each startup of the unit. It
can be used to quickly and easily compare two sets of parameters. It
can be compared to the "Clipboard" filled by the "Copy" function on our
personal computers.
The COMPARE workflow:
1. At startup, the normal set of parameters and the temporary one are the same.
2. You can switch between the temporary set and the normal one by briefly pressing the "COMPARE" button.
3. Any modifications made to either normal or temporary set are saved respectively in the normal or tempo-
rary set, without affecting the other. You have two separate sets of parameters at hand.
4. You can copy the normal set to the temporary one by pressing the "COMPARE" button for about 2 seconds.
The "COMPARE" button flashes, indicating that the copy has been made.
5. Any changes made in a parameters set (normal or temporary) are automatically saved in this set without
affecting the other. You have two different and separated parameters sets at your disposal.
Let’s look at an example:
1. Make sure the "COMPARE" button is off. Select a preset, add some modifications as desired: you now have
a new, particular set of parameters.
2. Save this current ("normal") set of parameters over the temporary one (see above). Now the two sets are
identical.
3. Make some more changes, for example change the speaker model. Now the two sets are different: you
can hear the difference by switching between the two (see above).
Another interesting way of using this feature is this: The temporary set of parameters is not dependent on any
particular preset. When on the normal set of parameters, if you load a preset, the content of the temporary set
will not be affected. Thus, you can copy a preset into the temporary set, then load a second one, and compare
the two.
This constitutes a simple and fast way of comparing either a full preset to another, a modified preset to the
original one, or only changes affecting a single parameter.
Two Notes Audio Engineering TORPEDO WoS III 15