Test Products International 715 - Manual (Page 22)

22
Trouble Shooting Guide
Problem Solution
Unit will not turn on Battery voltage is low, change batteries.
Unit will not turn off The CO level is above 0.030% and the failsafe will not
allow the unit to shut off, wait for CO levels to drop and
then shut off.
Can not print saved readings -Make sure the infrared eyes are aligned on the printer
and the 715
-Make sure the lights on the printer are not flashing if
so batteries need to be replaced
Wrong readings are on the printout -Make sure you are selecting the correct location to
print, if saved in “location 1” print “location 1”
-Make sure you are not selecting REAL time print mode
3
Contents
1. Introduction
2. Instrument
Overview
2.1 Front View
2.2 Back View
2.3 Side Views
2.4 Top View
3.
Turning On & Off and Charging
3.1 Turning On
3.2 Turning Off
4.
The 3 Functions
4.1 Function 1: - Flue Analysis
4.2 Function 2: - Temperature Reading
4.5 Function 5: - Date/Time
5. Saving
Data
6. Reviewing
Data
7. Printing
Data
Appendix A
Specifications
Appendix B
Calibration & Service
Appendix C
Guarantee
Appendix D
Troubleshooting Guide
Appendix E
Index