Tenqa SP-99 - Manual (Page 6)

4
StreaMing wireleSS audio froM a Bluetooth
tranSMitter
To stream music from a Bluetooth enabled transmitter, please make sure the SP-99
is paired properly by following the pairing instructions above and the blue indicator
light is on and not flashing. Many Bluetooth transmitters support auto-pairing and
do not require entering a password.
Note: The SP-99 does not support the AVRCP “remote control” function when
connected with a Bluetooth audio transmitter that connects via a 3.5 headphone
jack or similar device.
StreaMing wireleSS audio froM a Bluetooth equiPPed
coMPuter or Bluetooth uSb dongle:
To stream music from your computer via a Bluetooth USB dongle or an internally
equipped Bluetooth device, please consult the manufacturer’s instructions for your
particular device. Upon successfully pairing the devices, open your music player
software and press play. The music will be transmitted wirelessly to the SP-99.
Note: The Bluetooth USB dongle or internal Bluetooth device in your computer
must support AVRCP profile to enable the “remote control” function and A2DP to
support wireless audio streaming.
connecting directly with a 3.5MM audio cable
The SP-99 is equipped with a “line-in” jack enabling direct wired connections to
audio sources such as mp3 players, CD players, computers or other audio players
with a standard 3.5mm headphone jack. Before connecting with the audio cable,
please disable any Bluetooth connection with the SP-99 first.
Plug one end of the 3.5mm audio cable into the “line-in” jack and the other end
into your audio source. You can now play music directly from your audio device to
the SP-99.
Note: All “remote control” buttons on the device will be disabled when transmit-
ting audio via the “line-in” jack as these are Bluetooth AVRCP functions only.
Please operate all functions from the audio source directly.
SP-99_InstructionManual.indd 4 7/1/09 6:30 PM