SurgeX SX-20NE-RT-AR - Manual (Page 17)

SX-20NE-RT-AR User Manual
Page 16
VI. Web Server
(continued)
Schedule
The AR can schedule up to 8 recurring power events. For each event, you may define
the starting date and time, the action to be taken, and the repetition interval (optional).
Important: A Network Time Server (NTS) must be specified and enabled in order to
use the time scheduling feature. A list of public time servers is available at
http://www.ntp.org .
• Enable: Checking the Enable box enables the time scheduling feature.
• Time Server: Enter the IP address of the Network Time Server to be used.
• Time Zone: Specifies the local time zone relative to GMT. For example, the
setting for EST is -5.
• Date: Set the initial date for the event in mm/dd/yyyy format.
• Time: Set the initial time for the event in hh:mm:ss format. Hours are specified in
24 hour format; for example, 8:05:00 pm would be entered as 20:05:00.
• Repeat (Optional): Set the repetition interval. 0-999 Days, Hours, or Minutes.
• Action: Set the action to be scheduled. On, Off, or Cycle.
• Clear: Deletes a schedule.