Network, V. web server, Continued) – SurgeX SA-82 User Manual
Page 11
SA-82-AR / XF2-AR User Manual
Page 10
V. Web Server
(Continued)
Network
• IP Mode: Select Static to manually set the IP address using the fields below, or
choose DHCP to allow the AR to automatically acquire its network settings from a
DHCP server.
• IP Address: Enter a static IP address in dotted decimal format. This field will be
automatically set if using DHCP.
• Subnet Mask: Enter the Subnet Mask in dotted decimal format. This field will be
automatically set if using DHCP.
• Gateway: Enter the Gateway in dotted decimal format. This field will be
automatically set if using DHCP.
• HTTP Port: Specify the port the web server will be accessed on. If the port is
changed from the default value of 80, the AR may be accessed by specifying the
new port number in this format:
Example: Navigate
to
for an IP address of 192.168.1.254 on port 8000.
• Telnet Port: Specify the port to use for telnet access (default 23).
• DxP Port: Specify the port to use for DxP protocol (default 9100).