SurgeX SX-AX20 - Manual (Page 7)

SX-AX15 (20) Certificate Utility User Manual
Page 7
III. Method 2: Root Certificate Authority
(continued)
Step 3: Create Certificates for each Axess using the Root
Authority Certificate. (continued)
i. Click Next when done.
j. The CU will generate the required files and store them in
the subdirectory.
k. Click Home when done.
Repeat Step 3 for each Axess
Step 4. Upload the Certificate into the Axess.
a. Open the CU.
b. Click Upload a Certificate.
c. Click Next.
d. Enter or Browse to the location of the certificate files. The
default location is
e. Enter the IP address of the Axess to upload the certificate
to.
f. Click on Next.
g. The certificate upload progress is displayed. When
complete, Click Home.
h. After receiving the certificate, the Axess needs to be
rebooted via the CLI (Telnet, Serial) or the front panel
switch. This will not affect the status of the outlets.
Repeat Step 4 for each Axess
Note: All PCs with the same Root Authority Certificate installed
will be able to create and upload certificates to any Axess, and to
access all the Axess units with certificates made from that same
Root Authority Certificate, regardless of which PC created the
certificate.