StorCase Technology InfoMon - Manual (Page 28)

28 InfoMon Web-based Monitoring Utility
StorCase Technology, Inc. D89-0000-0106 Rev. F01
INFOMON STATUS SCREENS
InfoMon is comprised of the following HTML files:
Module Alarm Status RAID Module
InfoMon Main Usage Statistics
Configuration Power Supply Module Usage Statistics
Power Modules Blower Module Usage Statistics
Blower Modules I/O Module Usage Statistics
Drive Bays Drive Bay Usage Statistics
I/O Module (or PBP Module) Module Versions
To view any of these HTML files on the host system, double-click on any of the file names within
the InfoMon.exe window (Figure 1). The HTML file will then open up in the system default
browser.
These HTML files are accessible for remote monitoring via the internet (refer to Figures
18-31 for further information).
NOTE: An IP address is required for remote monitoring via the internet. Please contact
your system administrator to set up an IP address for the InfoStation and host
system.
Main Screen
NOTE: When remote monitoring via the internet, always hit "Refresh" on the browser
to make sure you are viewing the most up-to-date information.
The Main Screen (Figure 17) displays the following "at-a-glance" enclosure information:
InfoStation Type - Indicates the model of InfoStation being monitored.
(i.e. SCSI 4U 9-Bays)
.
Enclosure Status - Indicates the overall status of the InfoStation system.
If there is an error, click on the Enclosure Status link for
further information regarding alarm condition(s). Refer to sec-
tion "Module Alarm Status" for further information.
Average Temp - Displays the average temperature of the InfoStation chassis.
System Voltage - Displays the average 5V and 12V voltage status of the Info-
Station system.