StorCase Technology 14-Bay 4U SCSI Ultra160 - Manual (Page 21)

12 InfoStation User Interface
StorCase Technology, Inc. InfoStation 14-Bay User's Guide - Rev. C01
InfoStation Environmental Information and Set-Up
Status
The following steps show how to access the various InfoStation status information.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press ENTER so that display = Avg:xxC.
This display shows the average temperature in-
side the InfoStation chassis.
3. Press DOWN until display = DUALxxxx.
This display shows the type of RAID Controller
Module installed (if installed).
4. Press DOWN until display = Ch3:xxx.
This display shows the SCSI mode of Channel 3
(xxx represents either LVD or SE).
Press DOWN to scroll through Channels 2-0.
5. Press DOWN until display = NumCha:x.
This display shows the number of channels
configured for the InfoStation chassis.
6. Press DOWN until display = Fans:x.
This display shows the number of blowers
configured for the InfoStation chassis.
7. Press DOWN until display = 12.xxV.
This display shows the InfoStation system 12V
reading.
8. Press DOWN until display = 5.xxV.
This display shows the InfoStation system 5V
reading.
9. Press DOWN so that display = Ext:xxC.
This display shows the temperature outside the
InfoStation chassis.
ENTER
S t a t u s
T E M P : x x C
A v g : x x C
C h 3 : x x x
ENTER
DOWN
DOWN
DOWN
DOWN
UP/DOWN
DOWN
C h 0 : x x x
DOWN
5 . x x V
1 2 . x x V
D U A L x x x x
E x t : x x C
F a n s : x
N u m C h a : x
DOWN