StorCase Technology 14-Bay 3U Fibre - Manual (Page 31)

22 Fibre Channel Configurations
StorCase Technology, Inc. InfoStation 14-Bay FC User's Guide - Rev. B00
Figure 16: Typical Redundant Dual 7-Device Loops Configuration
NOTES: Auto Loopback is enabled when there are no SFP Modules installed in the open
Host ports.
SFP modules are optional. Contact StorCase for further ordering information.
Up to 9 InfoStations or 126 FC Drives maximum.
For redundant loop configurations, make sure your O/S supports disk
duplexing/mirroring. Refer to O/S manufacturer’s documentation for further
information.
FC-AL
#2
FC-AL
#1
PC
Dual Loop
FC HBA
Host 0
PC
Dual Loop
FC HBA
Host 1
= SFP Module
Installed
= No SFP
Module Installed
(Auto Loopback)
FC-AL #2 FC-AL #1