Rear panel – StorCase Technology DS351 User Manual
Page 13
Introduction
5
DS351 User's Guide - Rev. B02
StorCase Technology, Inc.
Rear Panel
(Figure 4)
Diagnostic Connector - Provides DS351 system status for diagnostic testing.
Provides signals for:
power supply status
fan failure
over temperature condition
A Molex 3.00mm (0.118") pitch Micro-Fit plug (Molex P/N 4302) is provided on the
DS351 back panel. A Molex 3.00mm (0.118") pitch Micro-Fit receptacle (Molex
P/N 42025) is required for mating connection. The above signals are active low and
require a 10K pull-up resistor.
SCSI I/O Connector(s) - The DS351 can be equipped with 50-pin MM (HD50), 68-
pin HD, or 68-pin VHDCI connectors. Up to two (2) SCSI channels can be supported.
Power Supply LED(s) - Illuminate while power supply is on and functioning
normally.
Cooling Fan(s) - Three (3) 80mm back panel fans provide ample chassis ventilation
(37.4 CFM each).
A/C Power In - Accepts U.S. and other available international standard power
cables. Contact StorCase for ordering information.
Figure 4: DS351 Rear Panel