StorCase Technology S20A108 - Manual (Page 17)

StorCase Technology, Inc. S20A108 User's Guide - Rev. A02
10 Installation
Figure 8: Receiving Frame Mounting Holes
Figure 7: Receiving Frame Motherboard Option Pins (W1)
0496a
4. With the drive carrier locked in place inside the receiving frame, install the DE200
into the 5.25” drive opening in the computer or expansion chassis. Use the
appropriate guides to position the DE200 , and fasten it into place with the four
(4) #6-32 Phillips screws provided. Figure 8 illustrates the location of the
mounting holes. Mounting holes are provided on each side and the bottom of the
receiving frame to accommodate a variety of mounting configurations. Use the
mounting holes which best suit the computer or expansion chassis configuration.
Pin 10
Pin 12
Pin 14
Pin 22
Pin 20
Pin 18
Pin 16
0439h
SYNC
RMST
DYST
Factory-Installed Jumpers
(Do Not Remove!)
RESERVED
RESERVED
RESERVED
RESERVED