Southbend P32D-171 - Manual (Page 33)

OWNER’S MANUAL 1199790 REV 0 (6/14) PAGE 33 OF 46
I NFRARED B ROILER
Problem Look for - 1
Not enough heat – Restriction in valve.
– Restriction in gas supply.
– Misalignment of orifice tube.
– Clogged orifice.
– Incorrect orifice.
– Low pressure on gas supply.
– Incorrect gas type.
Too much heat – Incorrect orifice.
– Defective or incorrectly set pressure regulator.
– Incorrect gas type.
Burner has blue haze – Misalignment of orifice tube.
– Low gas pressure.
– Air intake and/or flue exhaust blocked or restricted.
Burner fluttering – Burner’s air shutter needs adjustment (when on LOW setting).
Burner popping – Cracked or loose ceramic.
Slow burner ignition – Incorrect pilot flame length.
– Incorrect pilot alignment.
– Clogged pilot orifice.
Pilot will not remain lit – Clogged pilot orifice.
– Draft condition.
– Incorrect pilot orifice.
– Incorrectly adjusted pilot.
– Air in gas line.
No gas to burner – Gas supply is turned off.
The following table lists the possible causes of oven-related problems that may occur
T ROUBLESHOOTING B ROILER
T ROUBLESHOOTING