SkyRC B6AC+ V2 Charger - Manual (Page 3)

Congratulations on your choice of SKYRC B6AC+ Version 2(V2)
AC/DC Input Professional Balance Charger/Discharger. This unit is
simple to use, but the operation of a sophisticated automatic charger
such as SKYRC B6AC+ does require some knowledge on the part of
the user. These operating instructions are designed to ensure that you
quickly become familiar with its functions. It is therefore important that
you read right through the Operating Instructions, Warning and Safety
Notes before you attempt to use your new charger for the first time. We
hope you have many years of pleasure and success with your new
battery charger.
SKYRC B6AC+ V2 is the upgraded version for well-known IMAX
B6AC+. Compared with B6AC+ V1, it is more accurate and stable and
also has some new features and functions. Users could set the terminal
voltage by themselves and connect it to PC for PC control and firmware
upgrade. What's more, users could also use it as Lithium Battery Meter
and Battery Internal Resistance Meter. There are Automatic Charging
Current Limit, Capacity Limit, Temperature Threshold and Processing
Time Limit which makes the charger safer than V1.
SKYRC B6AC+ V2 is a high-performance, micro processor control
charge/discharge station with battery management suitable for use with
all current battery types, with integral equalizer for six-cell Lithium-
Polymer (LiPo), Lithium iron phosphate(LiFe) and Lithium-Ion (LiIon)
batteries; maximum 6A charge current and maximum 50W charge
power. It can be powered by 11-18V DC source or from 100V-240V via
the built in switch-mode power supply.
Please BE SURE to read these INSTRUCTIONS, WARNING and
SAFETY NOTES before you use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as
there is always a risk of batteries catching fire and exploding.
INTRODUCTION
01 · B6AC+ V2