SkyRC B6AC+ V2 Charger - Manual (Page 23)

The free “Charge Master” software gives you unparalleled ability to operate the charger
through the computer. You can monitor pack voltage, cell voltage and other data during
the charging, view charge date in real-time graphs. And you can initiate, control charging
and update firmware from “Charge Master”.
In order to connect the charger to the computer and use the “Charge Master”, you are
required to use a USB cable which is not included in this package. The cable must be
terminated on one end with “A” plug and the opposite end is terminated with “micro-B”
plug which can connect to charger directly.
The “Charge Master” can be download from www.skyrc.com.
USING THE CHARGE CONTROL SOFTWARE
“CHARGE MASTER”
THE SET CONTAINS
1. SKYRC iMAX B6AC+ V2 Charger
2. Power Cord
3. T Plug with Banana Connector Charging Cable
4. DC Cable with Banana Connector Charging Cable
5. T Plug with Alligator Clip Connector Charging Cable
6. T Plug with Futaba Connector Charging Cable
7. T Plug with JST Connector Charging Cable
8. T Plug with XT60 Connector Charging Cable
9. Battery Clamps
1
2
3
4
5
6
7
8
21 · B6AC+ V2
9