Sioux Tools SRT10S User Manual
Page 3
3
GENERAL OPERATION
• For best results, the direction of the tool travel is generally from left to right.
• It is recommended that movement be counterclockwise on outside curves and clockwise on inside curves. The tool spindle rotates clockwise.
CHANGING CUTTING BITS
1. Disconnect tool from air line.
2. Remove nose piece assembly.
3. Hold collet stationary with a 9/16 (14.3 mm) wrench. Loosen collet retaining nut with 11/16 (17.5 mm) wrench.
4. Insert bit into collet to desired depth. Tighten colet securely. Replace nose peice assembly.
ADJUSTMENTS
1. Base plate may be adjusted to expose desired length of cutter edge by loosening the lock nut and rotating the nose.
DECLARATION OF CONFORMITY
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
SRT10S
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
EN 792, EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Signature of issuer
January 1, 2006
Murphy, North Carolina, USA
Date and place of issues
Mark S. Pezzoni
President
Power and Specialty Tools
Name and position of issuer
*Sound Pressure
*Sound Power
*Vibration
Catalog No.
dBA
dBA
m/s
2
SRT10S
77.7
89.3
Less than 2.5
*per PN8NTC1
*per PN8NTC1
*per ISO 8662
SOUND AND VIBRATION READINGS