Sioux Tools STP10 - Manual (Page 3)

Form ZCE781 3 Date 2013February1/E
TO TAP A HOLE
• Make sure the hole to be threaded is the proper size for the tap.
• Apply a thread cutting lubricant.
• Hold the tap square and in line with the hole.
• Start the tool.
• When the tap reaches the desired depth, press the reverse button on top of the tool to reverse the rotation of the tool.
*Sound Pressure *Sound Power *Vibration
Catalog No. dBA dBA m/s 2
STP10P3C 80.0 91.6 Less than 2.5
STP10P3C20 80.0 91.6 Less than 2.5
STP10P3C32 80.0 91.6 Less than 2.5
STP10S3B12 77.7 89.3 Less than 2.5
STP10S5B12 77.7 89.3 Less than 2.5
STP10S7B12 77.7 89.3 Less than 2.5
STP10S12B12 77.7 89.3 Less than 2.5
*per PN8NTC1 *per PN8NTC1 *per ISO 8662
SOUND AND VIBRATION READINGS
DECLARATION OF CONFORMITY
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
STP10 SERIES
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
EN 792, ISO 12100-1, ISO 12100-2, ISO 8662, Pneurop PN8NTC1
following the provisions of
97/35/EC.
May 1, 2009
Murphy, North Carolina, USA
Date and place of issues
Robert Hartman
Vice President and General Manager-Power Tools
Sioux Tools Inc
Name and position of issuer
Signature of issuer
WARNING
When the rotation of the tool is reversed, the force on your hand will reverse.
Be ready for this reverse force. Have a firm footing at all times. Keep a firm grip on the tool at all times.
Reversal of force can cause injury.