Sioux Tools PISTOL TORQUE CONTROL TOOLS - Manual (Page 3)

3
*Sound Pressure *Sound Power *Vibration
Catalog No. dBA dBA m/s 2
2P1108TC 79.6 92.3 Less than 2.5
2P1208TC 79.6 92.3 Less than 2.5
2P1308TC 79.6 92.3 Less than 2.5
2P2108TC 79.6 92.3 Less than 2.5
2P2208TC 79.6 92.3 Less than 2.5
2P2308TC 79.6 92.3 Less than 2.5
2PX1108TC 79.6 92.3 Less than 2.5
2PX1208TC 79.6 92.3 Less than 2.5
2PX1308TC 79.6 92.3 Less than 2.5
2PX2108TC 79.6 92.3 Less than 2.5
2PX2208TC 79.6 92.3 Less than 2.5
2PX2308TC 79.6 92.3 Less than 2.5
*per PN8NTC1 *per PN8NTC1 *per ISO 8662
SOUND AND VIBRATION READINGS
6. Reinstall drive spindle or connector.
7. Reinstall the angle head assembly or front bearing support.
8. Test tool.
9. Repeat steps 3 through 6 until desired torque setting is reached.
CHART FOR APPROXIMATE TORQUE SETTING OF CLUTCH
Approximate
Output Torque
In. Lb.
MARK
Turns of Adjustment Nut From Mark On Clutch Case
SILVER SPRING
Spring rate—22 In. Lb.
per turn standard on
#1 low speed tools.
(Example 2A2 1 08TC)
BLUE SPRING
Spring rate—14 In. Lb.
per turn standard on
#2 medium speed tools.
(Example 2A2 2 08TC)
GREEN SPRING
Spring rate—9 In. Lb. per
turn standard on
#3 higher speed tools.
(Example 2A2 3 08TC)
DECLARATION OF CONFORMITY
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
2P1108TC, 2P1208TC, 2P1308TC, 2P2108TC, 2P2208TC, 2P2308TC, 2PX1108TC, 2PX1208TC, 2PX1308TC, 2PX2108TC, 2PX2208TC,
2PX2308TC including QTC, ATC, & BTC Suffixes
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
June 1, 2003
Murphy, North Carolina, USA
Date and place of issues
Gerald E. Seebeck
President
Sioux Tools Inc.
Name and position of issuer Signature of issuer