Simaudio Neo 340i Integrated Amplifier - Manual (Page 7)

340i Integrated Amplifier
____________________________________________________________________________________
7
Unpacking
The Nēo 340i integrated amplifier should be removed from its box with care.
The following accessories should be included inside the box with your amplifier:
9 AC power cable
9 ‘CRM-2’ remote control with two ‘AA’ batteries
9 This owner’s manual
9 Warranty and product registration information (USA and Canada only)
Once the Nēo 340i is unpacked, inspect it
thoroughly and report any damage to your dealer
immediately. We suggest that you keep all of the
original packaging, storing it in a safe, dry place in
case you’re required to transport this product. The
customized packaging is specially designed to
protect the 340i from any potential damage during
transit.
Please write the serial number of your new Simaudio Nēo 340i in the space provided below for future reference.
Serial No.: ________________
Installation & Placement
The Nēo 340i Integrated Amplifier is both powerful
and heavy. It requires reasonable ventilation to
maintain an optimum and consistent operating
temperature, especially since it will radiate heat
when driven hard. Consequently, it should be placed
in a location with empty space around it for proper
heat dissipation. You should never place another
component on top of this integrated amplifier. As
well, it should be placed on a solid level surface. You
should avoid placing it near a heat source or inside a
closed cabinet that is not well ventilated as this
could compromise the amplifier’s performance and
reliability. The 340i uses a large toroidal
transformer in its power supply; even though it is
well shielded, you should not place this integrated
amplifier too close to source components sensitive
to EMI, such as turntables, phono preamplifiers and
CD Players. Finally, y ou should never place another
component directly on top of this integrated
amplifier.
If you intend to use the Nēo 340i’s USB input
connection with a Windows-based computer,
you will need to install our USB HD driver,
which can be downloaded from the support
section of our website..
Note: Apple-based computers don’t require
this driver.