Simaudio Neo 340i Integrated Amplifier - Manual (Page 16)

340i Integrated Amplifier
____________________________________________________________________________________
16
Remote operation with multiple MOON components
Figure 6: Remote Operation with SimLink™
In figure 6 we have a 180 MiND Music Streamer and
a Nēo 340i Integrated Amplifier connected together
via their respective SimLink™ ports. The SimLink™
output on the 180 MiND is connected to the
SimLink™ input on the 340i (using a 1/8” mini-jack
cable). When you launch the MiND App on your
smart device and select this system’s ZONE, both
the 180 MiND and the 340i will turn on, with the
340i automatically switching to the MiND assigned
input, as described previously in the SimLink™
section. To shut down the system, press “Off” for
this ZONE in the MiND app.
Figure 7: Remote Operation with 12V Trigger
In figure 7 we have a Nēo 340i Integrated
Amplifier (used either as ONLY a preamplifier or in a
bi-amping configuration) and 330A Amplifier
connected together via their respective 12V triggers;
The 12V trigger output on the 340i is connected to
the 12V trigger input on the 330A (using a 1/8”
mini-jack cable). When you turn on the 340i via
remote control (or its Standby button), the 330A will
also turn on. The same rule applies when you put
the 340i into Standby mode.