ROHO JetStream Pr System - Manual (Page 9)

Attaching Accessories to the Fixed or Adjustable
JetStream Pro Back
Attaching The JetStream Pro Privacy Flap
Remove existing contoured foam pad from the JetStream Pro Back.
Attach the loop side of the double sided Velcro® portion of the
Privacy Flap
to the hook side Velcro strips on the JetStream Pro
Back.
Remove the cushion from the wheelchair and attach the opposite
end of the Privacy Flap to the Velcro on the base of the wheelchair
seat.
Replace the contoured foam pad to the JetStream Pro Back and the
cushion to the wheelchair.
Attaching the JetStream Pro Lumbar Support Pad
Remove the contoured foam pad from the carbon fiber shell.
Unzip the cover and place the lumbar support inside the cover of
the JetStream Pro Back Support
Position at the curve of your spine, or where it is most comfortable.
(The Lumbar Support may be placed either in front or in back of the
foam pad.)
Zip cover and place contoured foam pad back onto the carbon fiber
shell.
1.
2.
3.
4.
1.
2.
3.
4.
8