ROHO AGILIT Fixed Hardware - Manual (Page 3)

- 3 -
AGILITY FIXED HARDWARE INSTALLATION AND ADJUSTMENT
Note: AGILITY Installation video available at www.roho.com.
INSTALLATION OPTION A (Wrap Around) INSTALLATION OPTION B (Quick Install)
Back canes have push handles or other equipment
that may interfere with installation.
Back canes do NOT have push handles or other equipment
that may interfere with installation.
See chart in PRODUCT SPECIFICATIONS - Compatibility to determine if a Sleeve will be required.
WARNING: DO NOT attach the AGILITY with the individual seated in the wheelchair.
Before attaching AGILITY Fixed Hardware, review the criteria below to determine the appropriate installation option - A or B;
and if a Sleeve will be required.
PRODUCT SPECIFICATIONS*
Fixed Hardware Materials: Zytel ® Glass-filled Nylon, Steel, Stainless Steel, Aluminum and Polypropylene
Weight Range (based on noted item numbers):
AGILITY Minimum Contour AGILITY Mid Contour AGILITY Max Contour
2.75 - 5 lbs. (1.3 - 2.3 kg) 3.25 - 5.5 lbs. (1.5 - 2.5 kg) 5 - 6 lbs. (2.3 - 2.7 kg)
AG2-1410A-2 - AG2-2016AL-2 AG3-1410A-2 - AG3-2016AL-2 AG6-1416A-2 - AG6-2016AL-2
*NOTE: All measurements are approximate.
WARNINGS:
AGILITY with Fixed Hardware is compatible with many wheelchairs that are angularly adjustable, recline or tilt. AGILITY with
Fixed Hardware has been tested for tilt in space up to 60 degrees. Use with wheelchairs that tilt in space beyond 60 degrees
may cause damage to the AGILITY Fixed Hardware, resulting in a fall and the potential for serious injury. Consult a clinician to
determine if AGILITY with Fixed Hardware is compatible with the individual’s wheelchair.
Compatibility:
AGILITY Fixed Hardware fits circular back cane diameters (A):
Without Sleeve 1.0 in. - <1.25 in. (2.5 cm - <3.0 cm)
With Sleeve 0.75 in. - <1.0 in. (2.0 - <2.5 cm)
A
A
WARNING: AGILITY Fixed Hardware is NOT intended to be installed on back cane diameters
<1.0 in. (<2.5 cm) without the Sleeve. Doing so may result in an installation that is
NOT
secure. Consult with a clinician or the equipment provider to determine if your back canes
are compatible with AGILITY Fixed Hardware.
Note: It may be helpful to:
• Support the center of the back shell to keep the left (L) and right (R) hardware brackets even and flush up against the back canes during
installation and removal.
• Lock the wheelchair wheels before beginning installation.