ROHO AGILIT Fixed Hardware - Manual (Page 2)

- 2 -
INTENDED USE
A ROHO ® AGILITY ™ Back System (AGILITY) is a backrest replacement system for a wheelchair that is intended to provide trunk/pelvis
support and positioning to an individual. AGILITY includes:
• ROHO AGILITY Minimum Contour Back System (AGILITY Minimum Contour)
• ROHO AGILITY Mid Contour Back System (AGILITY Mid Contour)
• ROHO AGILITY Max Contour Back System (AGILITY Max Contour)
AGILITY has a weight limit of 300 lbs. (136 kg).
A ROHO AGILITY Back System (AGILITY) with Fixed Hardware is intended to be used by an individual who does not need to quickly remove
an AGILITY from a wheelchair.
AGILITY fixed hardware is intended to be used only with ROHO AGILITY Back Systems 10, 13, and 16 in. (25.5, 33, and 40.5 cm) in
height.
ROHO, Inc. recommends that a clinician, such as a doctor or therapist experienced in seating and positioning, be consulted to determine
if AGILITY with Fixed Hardware is appropriate for the individual’s particular seating needs.
CONTRAINDICATION: AGILITY fixed hardware is NOT intended to be used on ROHO AGILITY Back Systems greater than 16 in. (40.5 cm)
in height.
WARNING: AGILITY with Fixed Hardware must be correctly and securely installed on the wheelchair following all
instructions and warnings provided in the AGILITY Back Systems Operation Manual, this supplement and all applicable
AGILITY product supplements.
AGILITY with Fixed Hardware has been dynamically tested for use in a motor vehicle by a third-party testing facility. Testing
concluded that AGILITY with Fixed Hardware meets all applicable performance criteria for wheelchair back supports in 5.1 of WC20
“RESNA WC-4:2012, Section 20: Wheelchair Seating Systems for Use in Motor Vehicles”.
INFORMATION FOR SAFETY
- GENERAL WARNINGS and CAUTIONS
MOTOR VEHICLE TRANSPORTATION
- MOTOR VEHICLE TRANSPORTATION WARNINGS and CAUTIONS
AGILITY FIXED HARDWARE PARTS DETAIL
(A) Back Cane Bands
(B)
Back Cane Hardware Bolts
(M6 x 1.0 x 35mm Socket Head Cap Screws)
(C) Left (L) Side
(D) Right (R) Side
(E) Adjustment Cylinders
(F)
Depth and Angle Adjustment Bolts
(M6 x 1.0 x 30mm Pan Head Cap Screws)
(G) Back Cane Sleeve x 2
(A)
(B)
(C) (D)
(E)
(F)
(G)
To order replacement parts: In the U.S.A., contact the ROHO Customer Care Department or call your product provider. Outside the U.S.A.,
contact your country’s ROHO distributor.
x 2