ROHO SelectProtec safety enhancement system - Manual (Page 5)

4
Section 3 Parts Detail
SelectProtect Cover: The one-piece cover is composed of a top and a bottom section
with a zipper on each side. The top section positions both the shoulder and foot bolsters
in pockets. The bottom section positions the shoulder bolsters. Four straps are located
on each side of the bottom section to secure the cover to the bed frame.
Foot Bolsters: The two foot bolsters rest within pockets in the top cover section only.
The foot bolsters are each marked with an "F" and are interchangeable.
Shoulder Bolsters: The two shoulder bolsters are inserted into pockets in the bottom
cover section near the patient’s shoulder area of the mattress assembly and are
encapsulated in the top cover section when the zipper is closed. The shoulder bolsters
are each marked with an "S" and are interchangeable.
Operations Manual: Instructions on the SelectProtect setup, removal, care and other
important information. A.
B.
C.
D.
PARTS DETAIL
C.
A.
B.
Mattress
Pad
SelectAir
Mattress
Control
Unit
D.