Rocktron Utopia B200 User Manual

Page 68

Step 5

You now must store your changes. If you have made any changes to any parameter, the LED

above the "STORE" button will light. Press the STORE button to save the changes you have

made. "STORE AT PRESET" will ﬂash intermittently with the current preset. If you would

like to save this change to the current preset, press the STORE button again. To save this ad-

justed preset (and the parameters you have just changed) to a different preset location, use the

PRESET SELECT knob to choose the preset destination and then press the STORE button

again. Note that doing this will "over-write" the preset location you are saving to.

NOTE: To exit Pedal Controllers at any time or cancel any changes you have made, turn

either the PRESET or FUNCTION SELECT knob. The word CANCEL will ﬂash on the display

and then return you to the preset you were working on.

b 1 2 d r e a m d r e a m

S T O R E A T P R E S E T

b 1 2 d r e a m d r e a m

3 7 f l a - D L Y - R E V

b 1 2 d r e a m d r e a m

c a n c e l

b 1 2 d r e a m d r e a m

3 7 f l a - D L Y - R E V

8. Pedal Status......continued.............