Rocktron Utopia B200 - Manual (Page 54)

54
Step 2
c
*
Step 1 Enter the turner mode by pressing the 2nd button and then the MUTE/TUNER button
number 2.
You will notice the MUTE TUNER red LED is on and the tuner is active.
Pluck the harmonic at the 12th fret of the string you intend to tune.. The B200 will
detect the note and indicate its nearest even tempered pitch at the center of the dis-
play. If the note is slightly above or below any of the 12 even-tempered notes, a sharp
or flat condition is indicated by an asterisk symbol in the bottom line of the display at
either side of the displayed note as shown below:
Here is a note that is slightly above C (i.e. slightly sharp)
c
*
FLAT SHARP
c
*
FLAT SHARP
The Utopia B200 provides a built-in harmonic tuner which can be activated by pressing the 2nd button
and then the MUTE/TUNER button number 2. This will MUTE the output of the B200 allowing you
to tune in silence. Use 12th fret harmonics to tune.
8. MUTE/Harmonic Tuner Function