Rocktron Utopia B200 - Manual (Page 34)

34
6. TREMOLO Function
The TREMOLO function is available if you have selected it in the MODULATION EFX Function.
The Tremolo effect continuously varies the volume of the signal.
The PARAMETER SELECT knob will allow you to access these TREMOLO parameters:
The TREMOLO IN/OUT parameter determines whether the Tremolo is active or
bypassed for the current preset.
The LOCATION parameter determines whether the Tremolo is located Pre-Re-
verb or Post-Reverb. Most vintage amplifiers configured the Tremolo (or vibrato)
Post-Reverb.
The DEPTH parameter determines the amount of modulation for the Tremolo
signal. Lower DEPTH settings produce more subtle tremolo effects, while higher
settings will result in a more extreme tremolo effect.
The RATE parameter determines the speed at which the tremolo signal modu-
lates (or increases and decreases in volume).
The SHAPE parameter determines the wave shape of the tremolo signal. Select-
ing a different wave shape produces a different tremolo effect.
TREMOLO I/O
LOCATION
DEPTH
T-RATE
SHAPE