Rocktron UTOPIA G300 - Manual (Page 62)

62
The G300 can transmit MIDI commands to other MIDI receiving devices. You must however assign a
MIDI Transmit channel in order to do so. In the next section [ PROGRAM CHANGES ] you will learn
how to send program changes to your favorite piece of rack gear.
Step 2
Step 3
Step 4
M I D I c h a n n e l s
t r a n s m i t 1 6
M I D I C H A N N E L S
Step 1 Turn the FUNCTION SELECT knob to MIDI CHANNELS.
Turn the PARAMETER SELECT knob to "Transmit Channel."
m i d i c h a n n e l s
t r a n s c h a n l o f f
Turn PARAMETER ADJUST knob to select the appropriate MIDI Channel 1-16 and
OFF.
Once you have made all of the adjustments to the selected MIDI CHANNEL and
you would like to save the changes you made, press store and follow the instructions
under "STORING CHANGED PRESET PARAMETERS" in this manual.
8. MIDI CHANNELS - MIDI Transmit