Rocktron Xpression User Manual
Page 64
Operating the Xpression
Step 5
Press the STORE button to begin restoring the selected preset into the selected location. After
the process is completed, the display should read "ERRORS 0". This represents the number
of bytes that the Xpression found did not initialize properly. Any number of errors other than
"0" means that the Xpression may not have initialized properly and the process should be
repeated.
!! CAUTION !!
Pressing the STORE button at this time will overwrite
the current preset with the displayed factory preset.
ERRORS 0
The Xpression will remain in this condition until the FUNCTION SELECT
control is turned to exit the Factory Restore function. The preset currently recalled
will be the preset most recently restored into the current location.
61