Rocktron Xpression - Manual (Page 22)

compare store bypass
parameter
select
function
select
parameter
adjust
Xpression Functions and Parameter Descriptions
Each Xpression preset is divided into individual blocks called functions (such
as "Mixer", "Reverb", etc.). Within each function is a set of controls which allow
you to manipulate various aspects of that function. These controls are called pa-
rameters. The setting of each of the parameters determines the overall sound of
each Xpression preset.
The Xpression user interface is set up to allow you to first access each func-
tion (via the FUNCTION SELECT control), then the list of available parameters
for the selected function (via the PARAMETER SELECT control) and, finally,
the adjustable value for each parameter (via the PARAMETER ADJUST control).
Step 2:
Turn to select a parameter
within the selected function.
Step 1:
Turn to select a function.
Step 3:
Turn to alter the value of the
selected parameter.
The remainder of this section will discuss each of the effect-based func-
tions and the associated adjustable parameters that they provide. Functions not
discussed in this section are utility-based, and are described in Section 7, "Oper-
ating the Xpression" on page 39.
Functions and Parameter Descriptions
19