Rocktron Blue Thunder - Manual (Page 35)

Operating the Blue Thunder ™
Step 2 Turn the FUNCTION SELECT control to select the function heading which contains the
parameter(s) you wish to change.
Changing preset parameters
**** REVERB ****
Turn the PARAMETER SELECT control to the specific parameter you wish to change.
REV DECAY 59
Turn the PARAMETER ADJUST control to alter the parameter value. The LED above the
STORE button will light, indicating that the preset has had a parameter altered from its stored
value.
REV DECAY 32
Step 4
Step 3
Storing changed preset parameters
Step 5 While viewing a function or parameter title, press the STORE button to store the altered
parameter(s). "STORED" will flash briefly on the display.
STORED
32
Step 1 Press the EDIT button to enter the “EDIT MODE”
EDIT MODE