Delphi XpressRC SA10316 - Manual (Page 53)

Configuring your Xpress RC
Locate a suitable FM frequency from the list and press the XM button .
Set your car radio to the frequency selected .
Set the line out level
To connect the Audio Out on the Xpress RC car cradle directly to your car’s stereo to trans-
mit audio, you can:
• Use the cassette adapter
• Use your car stereo’s audio input called “Aux In”
Either of these methods will give you the best audio quality . When using either of these
methods to transmit audio through your car’s stereo, you can adjust
Xpress RC ’s audio level
to match other audio sources .
1 Press menu.
Select Vehicle Mode, and press the XM button .
Select Line Out Level, and press the XM button .
Line Out Level is available only when the FM Modulator is turned OFF .