Delphi XpressRC SA10316 - Manual (Page 16)

1
Step : Install the vent or swivel
mount.
You can use either the vent mount or the swivel
mount for your Xpress
RC depending on your
particular situation .
Installing the vent mount
1 Locate a vent with horizontal slats
sturdy enough to hold your XM cradle and radio .
Adjust the clamps to fit your vent .
Snap the mount onto the vent .
To remove, push the mount into the vent, then lift up .
Swivel Mount
Vent Mount
Vehicle Installation
Extra Adhesive
Pad