RAVE Sports Splash Trax Arch Bridge - Manual (Page 29)

Repairs
For large holes, tears or seam failures, contact RAVE Sports at
1-800-659-0790.
Additional repair patches can be found online at www.ravesports.com.
For minor holes and tears:
• Inflate the product and locate the leak by spraying the tube with mild
soapy water.
• Determine the hole size and cut a patch 1-2 inches wider than the
diameter of the hole. Make sure all corners of the patch are rounded.
• Deflate the product and clean the patch and area around the hole
with rubbing alcohol. Let dry completely.
• READ AND UNDERSTAND THE WARNINGS ON THE GLUE CONTAINER.
• Apply glue to the patch and the area around the hole. Let the glue dry
until it is tacky to the touch. (About 30 seconds).
• Lay the product on a flat, hard surface and apply the patch. Working
from the center to the outer edge, rub out any air bubbles between
the patch and the product.
• Let patch dry for 24 hours before attempting to inflate the product.
For emergency/quick repairs:
• Have a supply of Tear Aid® patches on hand (Item #20100). These
self-adhesive patches can be applied and the product used
immediately. Great for a temporary fix until a more permanent patch
can be applied.
• Order from RAVE Sports directly on our website www.ravesports.com.
29