RAVE Sports Splash Trax Arch Bridge - Manual (Page 18)

SET UP
Inflation
Roll out the product face up on flat ground. Make sure the area is free of rocks,
sticks or other sharp objects that could puncture or damage the product.
We highly recommend using the RAVE High Speed
Inflator/Deflator. It will provide rapid inflation and deflation.
(Item #01083, not included)
VALVE OPERATION
To lock open valve, depress the
stem and rotate ¼ turn clockwise.
To close valve, depress the stem
and rotate ¼ turn counter-
clockwise. Replace cap on valve
after inflation to ensure air tight
seal.
If you are using the RAVE Sports High Speed Inflator
(Item #01083), simply lock the adaptor onto the end of the inflation hose, turn on
inflator, then insert adaptor into valve body. Turn ¼ turn to lock in place.
NOTE: This inflation adaptor and gauge will automatically open the valve
when inserted and will close the valve when removed. You do not need to
manually open/close the valve when using this special adaptor.
IMPORTANT: For the Dome, Pyramid & Tunnel you must inflate the base first
to the proper pressure. Inflate the upper portion only after the base has been
inflated.
Check inflation using the Rave Sports digital pressure gauge.
To operate gauge:
1. Depress “ON” button.
2. Wait for Self Calibration to complete and “0.00” digital
display to appear.
3. Insert gauge into valve & turn ¼ turn Clockwise to lock it in.
18