RAVE Sports Splash Trax Arch Bridge - Manual (Page 19)

DO NOT USE AN AIR COMPRESSOR TO INFLATE THIS PRODUCT. USE OF AN AIR
COMPRESSOR CAN CAUSE RAPID OVER – INFLATION CAUSING THE
TUBE TO BURST WITH POTENTIALLY DAMAGING FORCE TO EYES, EARS, SKIN
AND LIMBS.
USE OF AN AIR COMPRESSOR ON OVER-INFLATION CAN DAMAGE THE TUBE
BEYOND REPAIR, THUS VOIDING THE WARRANTY.
4. Wait for gauge reading to stabilize.
5. To remove gauge: Rotate1/4 turn Counter Clockwise .
6. Add/Remove air to achieve minimal operating pressure as stated for
each module.
7. Close Valve Cap.
Inflate to recommended operating pressure printed on each module. To
avoid damaging the unit, DO NOT OVER INFLATE beyond the stated
pressure.
To Deflate:
Rapid deflation can be achieved using the “deflate” side of the motor housing.
Attach the hose to the deflate side of the motor housing and lock the valve adaptor
into the valve.
IMPORTANT
It is normal for the air pressure within air filled tubes to fluctuate depending on
air and water temperatures. It may be necessary to increase or decrease the air
pressure in your product accordingly. To avoid damage on extremely hot days it
may be necessary to check and release the air pressure from your product
throughout the day. Monitor the air pressure in the product periodically. Add or
let out air as necessary to maintain proper operating pressure.
WARNING
Move to Water: Use 2 people to carry each section to the water.
CAUTION: To avoid risk of puncture or damage to the product, DO NOT DRAG the
product. Always carry it to the water. Do not drag it from shore or pool edge into
!!
19