RAVE Sports Turbo Sled - Manual (Page 15)

14
Troubleshooting
Air chambers won’t hold air:
• Check to make sure all valves are completely closed.
• Check for holes in the slide following the procedures in the
“Repairs” section.
Repairs
Additional repair patches can be purchased at www.ravesports.com.
For Minor Holes or Punctures:
 Remove the bladder from cover
 Inflate the slide and locate the leak by spraying the tube with
soapy water. Bubbles will appear where there is a leak. Mark
location of hole.
 Determine the hole size and cut a circular patch ½ - 1 inch wider
than the hole with repair kit included with the product.
 Remove air from the tube and dry tube completely where the
patch is to be applied.
 Peel off paper back from patch, apply repair patch to area and
work out any air bubbles from beneath the patch.
 Apply weight to the patched area for one hour before re-
inflating.
For warranty and return information, please visit
www.ravesports.com