RAVE Sports Rope Swing Freestanding Package - Manual (Page 7)

6
Inflating any RAVE Waterpark Attachment
We highly recommend using the RAVE High
Speed Inflator/Deflator. It will provide rapid
inflation/deflation and will achieve optimum air
pressure in your RAVE product. (Part # 01083
not included).
To lock open valve, depress stem and
rotate ¼ turn clockwise. To close valve,
depress stem and rotate ¼ turn counter-
clockwise. The valve stem should be in
the depressed position while inflating.
Replace cap on valve after inflation to
ensure air tight seal.
If you are using the RAVE Sports High Speed
Inflator (P/N 01083), simply lock the adaptor onto
the end of the inflation hose and insert into the
valve body. Turn ¼ turn to lock in place.
NOTE: This inflation adaptor will
automatically open the valve when inserted and will close the
valve when removed. You do not need to manually open/close
the valve when using this special adaptor.
IMPORTANT: A PROPERLY INFLATED TUBE WILL FEEL LIKE A
FIRMLY INFLATED BASKETBALL.
To Deflate:
Rapid deflation can be achieved using the “deflate” side of the motor
housing. Attach the hose to the deflate side of the motor housing and
lock the valve adaptor into the valve. Turn on deflator and let run until
all air is evacuated from the tube.
OPEN
CLOSE