RAVE Sports Rope Swing Freestanding Package - Manual (Page 17)

16
Step 8
Repeat the same steps 6-7 for the opposite strap. Once both straps
are fastened, check and make sure both are secure.
Carry assembled Access Ramp and Boarding Platform to shallow
water.
DO NOT DRAG!
How to Connect the Rope Swing
to the Access Ramp and Boarding
Platform
NOTE: There are three straps connected to
the Rope Swing center tube section. These
straps are not used when connecting the
Rope Swing to the Activity Island. Roll up
the straps and secure with a rubber band or
similar device so they are not in the way when attaching to the Activity
Island.
Step 1
While in shallow water, float the assembled Rope Swing next to the
Boarding Platform with the Access Ramp already mounted.
Step 2
There are two buckle straps at the top of the
Access Ramp. Run these over the top of
the Rope Swing tube.
Feed the two long lower middle straps
around the bottom side of the Rope Swing
Tube and through the buckles on the upper
straps. Pull tightly to secure the Access
Ramp tightly to the Rope Swing tube.