RAVE Sports Rope Swing Freestanding Package - Manual (Page 14)

13
IMPORTANT: Do not attempt to use the Rope Swing as a
free standing unit without these two devices being
attached!
CONNECTING ACCESS RAMP TO
BOARDING PLATFORM
IMPORTANT: FIRST FOLLOW STEPS 1-6 ON
ROPE SWING ASSEMBLY (SKIP STEP 2
WHEN SETTING UP FREE STRANDING ROPE
SWING AS THE GREY PLATFORM IS NOT
USED IN THIS CONFIGURATION)
Step 1
Before inflating the Access Ramp and Boarding Platform, lay the
inflatable on a flat surface. Make sure there are no sharp objects
under the product that might puncture the material.
Step 2
Locate the valve and start inflating. See
inflating and valve operation on page 6.
Inflate both Access Ramp and Boarding
Platform until they are firm like a
basketball.
Step 3
Align the rings on the sloped end of the Access Ramp with the two
rings on top of the Boarding Platform.