RODE Microphones NT6 - Manual (Page 8)

- 8 -
Connecting
the miniature cable
• With the head and pre-amplifi er in position and
the XLR cable connected to the back of the
pre-amplifi er, it is time to connect the mini-XLR
connectors.
• With the pre-amplifi er assembly in one hand and
the mini-XLR in the other, align the key on the
connector to the groove on the back of the pre-
amplifi er. Gently insert the connector ensuring you
align the two elements correctly, without applying
excessive force during insertion.
• The same method is to be used when attaching
the min-XLR to the back of the head assembly.
• The miniature connection cable is more than
capable of withstanding the rigours of professional
use, however it is important to understand and
where possible consider the following points: