RODE Microphones NT6 - Manual (Page 6)

- 6 -
• The NT6 is supplied with a selection of fi ttings
and adaptors designed to ease positioning and
mounting. The NT6 head attaches to a 2-axis
swivel-mount that allows it to independently move
and lock in position.
• To further increase the versatility of the NT6, it
comes supplied with 2 threaded adaptors, a 1/4”
to 5/8” and a 1/4” to 3/8” that enable the capsule
assembly to be securely attached to a wide variety
of mic stands, tripods and boompoles.
• The larger Adaptor is the 1/4” to 5/8”. When
screwed into the base of the swivel mount it enable
the capsule assembly to be attached to a standard
5/8” thread found on microphone stands.
• The smaller 1/4” to 3/8” adaptor, when screwed
to the base of the swivel mount enables the head
assembly to be attached to a standard tripod or
boompole.
Mounting the NT6