Pitney Bowes DM800i Series - Manual (Page 143)

DM800i™ Series Digital Mailing System Operating Guide
SV61162 Rev. D 9 - 3
Tape is still on
roll 1. When you see the red stripe on the tape, go to the Tape Maintenance
screen:
a. Press the Menu key.
b. Select Maintenance.
c. Select Load Tape.
d. Select Unload Tape.
2. If your DM Series™ Digital Mailing System does not have the optional
WOW® module, open the feed cover and remove the tape roll. 

If your DM Series™ Digital Mailing System has the optional 
Weigh-On-The-Way® (WOW®) module, open the WOW® cover.
Refer to the appropriate figure below.
Location of the tape roll
under the feed cover on a
DM800i™ system without
the optional WOW™ mod-
ule.
DM800i™Series Digital Mailing System
Location of the tape roll
under the WOW™
cover on a DM800i™ or
DM800i™system with
the optional WOW™
module.
DM800i™ Series Digital Mailing System with the
optional WOW™ module