Peg-Perego Primo Viaggio Convertible User Manual

Page 28

- 28 -

Installing your child restraint in the vehicle - Rear Facing mode

REAR FACING MODE USING

LATCH SYSTEM

1. Recline the child restraint to the rearfacing

position as shown in the picture. To recline

the child restraint, pull the handle located

below the front edge of the shell (A)as shown

in detail. An audible "click" is heard when

the seat is properly locked into position.

Note: for easier adjustment, lift the back of the

seat slightly with your free hand to remove

some weight from the mechanism.

2. Disconnect the latch straps from the

storage bar by pushing on the red button

and pulling the straps at the same time.

3. Slide the straps toward the front of the child

restraint. Check that the straps are not reversed.

4. Lean the reclined seat, unoccupied, on

the selected vehicle seat in the rearfacing

mode making sure that the front part of

the seat touches the vehicle seat backrest.