DirecTV SAT GO - Manual (Page 25)

24
Setting Up Your DIRECTV ® Sat-Go
Connecting Your DIRECTV Sat-Go to other Equipment
There are several ways to connect your DIRECTV Sat-Go to match your particular equipment
setup and to gain optimum signal quality. The basic steps are as follows:
• Connect your DIRECTV Sat-Go to your VCR or DVD player
• Connect your DIRECTV Sat-Go to a telephone line
• Connect your DIRECTV Sat-Go to your second TV or monitor
• Plug in all power cords.
The following pages give detailed instructions on the types of connections you can make,
depending on the equipment you have, in order to get the best picture and sound quality. Note
that the back panels of your equipment may not exactly match those illustrated.
NOTE: Not all cables come with your DIRECTV Sat-Go you may need to purchase
additional cables depending on your setup.
TIP: When working with cables, be sure to connect corresponding outputs and inputs
(Video OUT to Video IN, Right Audio OUT to Right Audio IN, etc.). Never connect an IN
to an IN or an OUT to an OUT. All A/V jacks and inputs are color coded. Always match
the color of the plug to the same color of the jack.
SatGo_03-30-07(converted).indd 24 SatGo_03-30-07(converted).indd 24 5/18/07 4:48:37 PM 5/18/07 4:48:37 PM