ParkZone PKZ6080 - Manual (Page 11)

EN
Elevator
Bind your aircraft and transmitter before doing these tests. Move the controls on the transmitter to make sure the aircraft control surfaces move correctly. Reverse
controls in your transmitter as necessary. After doing the Control Test, correctly set the failsafe. Make sure the transmitter controls are at neutral and the throttle
and throttle trim are in the low position, then rebind the model to your transmitter. If the receiver loses its link to the transmitter, the failsafe makes the controls
and the throttle revert to the settings made at binding.
Aileron
Stick Left
Stick Right
Up Elevator
Down Elevator
Control Direction Test
11