ParkZone PKZ5880 - Manual (Page 10)

EN
Bind your aircraft and transmitter before doing these tests. Move the controls on the transmitter to make sure the aircraft control surfaces move correctly. After
doing the Control Test, correctly set the failsafe. Make sure the transmitter controls are at neutral and the throttle and throttle trim are in the low position, then re-
bind the model to your transmitter. If the receiver loses its link to the transmitter, the failsafe ensures the controls and throttle revert to the settings made at binding.
Control Direction Test
Elevator
Aileron
Rudder
Stick
Left
Stick
Right
Stick
Left
Stick
Right
Down
Elevator
Up
Elevator
10