Nor-Cal CDG 160 OP Lit - Manual (Page 22)

22 CDG160-OP-LIT (2010-06)
4 Operation
Put the gauge into operation. If you are using a Nor-Cal con-
troller, define the measurement range.
A warm-up time of at least 2 hours should be allowed; for precise
pressure measurements a warm-up time of at least 4 hours is
required.
4.1 Status Indication
SP1
SP2
STATUS SP ZERO
LED LED status Meaning
off no supply voltage
lit solid green measurement mode
blinking green
short blinks
long blinks
warning
warming up
lit solid red error
lit solid green p
≤ setpoint 1
blinking green waiting for setpoint 1 input
off p > setpoint 1
lit solid green p
≤ setpoint 2
blinking green waiting for setpoint 2 input
off p > setpoint 2