MTI Wireless Edge MT-120018 - Manual (Page 2)

Alternately and equally tighten the two M8 bolts
up to it's defined tightening torque ,
in order to prevent unequal pressure
on the cast Clamps
STEP 2 (FOR POLES SIZES 1.75"-3")
Connect the base bracket as shown on page 2.
socket on item 1.
9
8
Install the antenna to the pole using item 11,
x2
Step 1
RADIO ENCLOSURE
12
x2
Use tightening torque of 24 N/m.
Note: The bolt head shall be positioned in the
Use tightening torque of maximum14N/m.
surfaces) using item 6,7,8,9 as shown.
tighten the bracket using items 8,9,12 (for
11
small pole diameter use item 6 instead of item 12).
ANTENNA OR
6
Connect item 10 to item 1 (mate knurled
x2
or
INSTALLATION ON A POLE
SHEET 3 OF 4
WIRELESS EDGE
RD41169400C/REV-G
10
9
1
6
8 7
ANTENNA OR RADIO
ENCLOSURE
11 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, Israel
Fax: 972-3-9008901, Tel: 972-3-9008900
www.mtiwe.com